Digital clock with BCD counters (settable)

Description

The same digital clock as shown in the previous applet, but with additional logic to set the time. The user interface consists of three switches, and is more or less typical for standalone digital clocks:

• click the stop switch to reset the seconds counter and pause the clock
• click the set_minutes switch to increment the minutes counter once per second
• click the set_hours switch to increment the hours counter once per second

The counter for the lower seconds digit simply runs continously. The upper seconds digit counter, however, needs to be reset after 59 seconds to avoid counting to 99 seconds. This is achieved by connecting the asynchronous reset input of the counter block to its Z2 and Z1 outputs. Therefore, as soon as the counter reaches 60, it is immediately asynchronously reset and at the same time generates the carry to increment the minutes counter - which uses the same structure as the seconds counter.

The hours counters use the same trick to immediately asynchronously reset the hours after the hours reach the value 24. Because the reset is asynchronous and very fast, the user has no chance to see the wrong values (like 00:00:60 or 24:00:00) before these are corrected to the right values.

Run the applet | Run the editor (via Webstart)